Download here: http://gg.gg/o6dd4
There are many ways to remotely control a Windows computer software such as using third party software or the built-in Remote Desktop feature. However, the choices of remotely controlling another computer that is running a different operating system can be quite limited. Although Windows dominates the computer market, but you can still find a lot of people using Macs that runs on OS X.
*Microsoft Remote Desktop For Mac Os X 10.7.5
*Microsoft Remote Desktop For Mac Os X Yosemite
*Microsoft Remote Desktop For Mac Os X 10.6.8
*Microsoft Remote Desktop Os X
*Microsoft Remote Desktop For Mac
*Os X Remote Desktop
Apple has their own remote access software called Apple Remote Desktop (ARD) which is a shareware that cost $79.99. It comes with some powerful features such as software distribution and automation to perform repetitive tasks on remote computers, but unfortunately it is meant for Mac to Mac and not cross platform.
Use Microsoft Remote Desktop for Mac to connect to a remote PC or virtual apps and desktops made available by your admin. With Microsoft Remote Desktop, you can be productive no matter where you are. GET STARTED Configure your PC for remote access using the information at https://aka.ms/rdsetup. Remote Desktop → Mac OS X Instructions The following page(s) contain instructions on using Remote Desktop to connect to Faculty & Staff Windows computers on the UMKC campus (from off-campus). Your campus computer must be powered on to receive connections.
In this article, we will be sharing a few methods on how you can remotely access Apple Mac computers from another computer running Windows for free.1. TeamViewer
TeamViewer is one of the most popular remote access software that is commonly used to provide remote support because it is easy to use and comes with really powerful features such as file transfer, switch sides, conference call, VoIP, screen recording and etc. Other than that, TeamViewer also works on multiple operating systems where it allows you to control a Mac OS X system from a Windows computer.
You will need to download and install the “HOST” version of TeamViewer on the Mac computer that you want to remotely control. As for the Windows computer that will be controlling the Mac computer, simply download the TeamViewer full version, install and run it. Enter the ID followed by the password and you’re able to connect to the OS X machine. The ID will not change and always stay the same on the machine.
The TeamViewer Host options can be accessed by clicking on the TeamViewer icon at the menu bar and select Preferences. You can change your password, configure the voice, microphone and phone conferencing, access control and etc.
Download TeamViewer Host for Mac
2. LogMeIn Free
LogMeIn Free allows you to conveniently remotely control a Mac computer running OS X from Windows through its web interface or the Firefox plugin. First you will need to create a free account, then login from the Mac computer and click the Add Computer button to download the LogMeIn Installer. After installation, you are able to access that computer from any other computer by logging in to LogMeIn. Do take note that the file transfer feature is disabled in the free version.
Download LogMeIn Free
3. RealVNC
Although there are many versions of VNC which are mostly free, RealVNC targets the enterprise users by offering shareware version and cross platform support to Windows, Mac OS X, Linux, Solaris, HP-UX and AIX. Similarly to LogMeIn, the free version of RealVNC provides a very basic remote access feature without file transfer, chat, session encryption, optimized performance, printing and deployment tool. You can use other VNC viewer such as TightVNC and UltraVNC to access the RealVNC server.
Download RealVNC12Next › View AllMicrosoft Remote Desktop For Mac Os X 10.7.5 You might also like:Unable to Remotely Control or Configure Kaspersky using Remote Access SoftwareSilently Push Install VNC Server to Remote ComputersRemotely Enable or Disable Windows Remote DesktopTop 8 Remote Access Software for Providing Online SupportCrack or Decrypt VNC Server Encrypted Password 6 Comments - Write a CommentSwikriti2 years ago
Can I use softwares like Photoshop, Illustrator, Dreamweaver etc (which are in MAC) from Windows system if the windows system doesn’t have the same softwares?Reply
If the OSX commuter has remote management enabled, what client does the Windows computer need to run to connect to it?Replymenlo6 years ago
Logmein Free isn’t completely free anymore. You can buy an account, and for IT people, you can buy Logmein Central, and then tie a couple of Logmein Pro pay-for machines to the account (easy). Then you are given logmein free subscriptions you can then tie into the account. If the remote access is going to give you an hourly rate or save you time (and time is money) then it is WORTH buying the annual subscription.
The thing that has always been an issue for me is Logmein wants to boast about their ability to stream the remote desktop as HD, and frankly that is just bells and whistles to me. That requires WAY more bandwidth, and is pointless in most cases. The GREAT thing about logmein, even over their join.me product, is you can cut back the color quality or even make it black and white. This SIGNIFICANTLY speeds up the remote session to make sure things work right. Join.me is a $100/yr subscription, to compete with their enterprise version rescue, but again the quality of the remote session is simply limiting and time wasting for the average IT guy who needs to help the user.
More to the point of Logmein Pro, you can actually perform secure file transfers, and monitor the system in a dashboard. The Dashboard for pro subscriptions ALSO gives you things like the top fifteen running processes, all scheduled tasks, the most current 15 lines of the event viewer log, etc. You can perform various levels of remote boot, and even utilize a scripting type offering called one to many.
It is incredibly powerful, and COMPLETELY worth the cost of the annual subscriptions.
(I do NOT work for Logmein, just an IT consultant.)Reply
Thank you very much. Used realvnc viewer on win 7 64bit, to connect to a mac laptop on OS X Mavericks.ReplyJC7 years ago
I was using the built in vnc server for osx, but with the last 10.8.5 update my connection got a lot of lag. I updated my vnc viewers to the latest but that didn’t help. I finally downloaded the vine vnc server ( turned off the osx vnc server ) and bingo problem solved. Thanks for the article, it was a great help.Reply
thanks a lotReplyLeave a Reply-->
We regularly update the Remote Desktop client for macOS, adding new features and fixing issues. Here’s where you’ll find the latest updates.
If you encounter any issues, you can always contact us by navigating to Help > Report an Issue.Updates for version 10.4.0
Date published: 8/20/20
In this release, we’ve made substantial updates to the underlying code that powers the Remote Desktop experience across all our clients. We’ve also added some new features and addressed bugs and crashes that were showing up in error reporting. Here are some changes you may notice:
*
PC Quick Connect (Cmd+K) allows you to connect to a PC without creating a bookmark.
*
Auto-reconnect now recovers from transient network glitches for PC connections.
*
When resuming a suspended MacBook, you can use auto-reconnect to reconnect to any disconnected PC connections.
*
Added support for HTTP proxies when subscribing and connecting to Windows Virtual Desktop resources.
*
Implemented support for HTTP proxy automatic configuration with PAC files.
*
Integrated support for NETBIOS name resolution so you can connect to PCs on your local network more easily.
*
Fixed an issue where the system menu bar wouldn’t respond while the app was in focus.
*
Fixed a client-side race condition that could cause decryption errors on the server.
*
Made improvements to monitor layout and geometry heuristics for multimon scenarios involving Retina-class monitors.
*
Multimon layout configurations are now maintained across session redirection scenarios.
*
Addressed an issue that prevented the menu bar from dropping in multimon scenarios.
*
User account UI that interacts with the macOS keychain will now surface keychain access errors.
*
Hitting cancel during workspace subscription will now result in nothing being added to the Connection Center.
*
Added key mappings for Cmd+Z and Cmd+F to map to Ctrl+Z and Ctrl+F respectively.
*
Fixed a bug that caused remote apps to open behind the Connection Center when launched.
*
Worked around an issue where AAC audio playback on macOS 10.15 would cause the client to stall.
*
Shift+left-click now works in Unicode mode.
*
Fixed a bug where using the Shift key triggered the Sticky Keys alert in Unicode mode.
*
Added a check for network availability before connection initiation.
*
Addressed pulsing of PC thumbnails that sometimes happened during the connection sequence.
*
Fixed a bug where the password field in the Add/Edit User Account sheet become multiline.
*
The ’Collapse All’ option is now greyed out if all workspaces are collapsed.
*
The ’Expand All’ option is now greyed out if all workspaces are expanded.
*
The first-run permissions UI is no longer shown on High Sierra.
*
Fixed an issue where users were unable to connect to Windows Virtual Desktop endpoints using saved credentials in the DOMAINUSERNAME format.
*
The username field in the credential prompt is now always prepopulated for Windows Virtual Desktop connections.
*
Fixed a bug that clipped the Edit, Delete, and Refresh buttons for workspaces if the Connection Center wasn’t wide enough.
*
The ’email or workspace URL’ field in the Add Workspace sheet is no longer case-sensitive.
*
Fixed a number of accessibility issues that impacted VoiceOver and keyboard navigation scenarios.
*
Lots of updates to improve interoperability with current and upcoming features in the Windows Virtual Desktop service. Paragon ntfs for mac cracked download.
*
You can now configure the AVC support level advertised by the client from a terminal prompt. Here are the support levels you can configure:
*Don’t advertise AVC support to the server: defaults write com.microsoft.rdc.macos AvcSupportLevel disabled
*Advertise AVC420 support to the server: defaults write com.microsoft.rdc.macos AvcSupportLevel avc420
*Advertise support for AVC444 support to the server: defaults write com.microsoft.rdc.macos AvcSupportLevel avc444
Thanks again to everyone who reported bugs and took the time to help us diagnose problems!Updates for version 10.3.9
Date published: 4/6/20
In this release we’ve made some changes to improve interoperability with the Windows Virtual Desktop service. In addition, we’ve included the following updates:
*Control+Option+Delete now triggers the Ctrl+Alt+Del sequence (previously required pressing the Fn key).
*Fixed the keyboard mode notification color scheme for Light mode.
*Addressed scenarios where connections initiated using the GatewayAccessToken RDP file property didn’t work.
Note
This is the last release that will be compatible with macOS 10.12.Updates for version 10.3.8
Date published: 2/12/20
It’s time for our first release of 2020!
With this update, you can switch between Scancode (Ctrl+Command+K) and Unicode (Ctrl+Command+U) modes when entering keyboard input. Unicode mode allows extended characters to be typed using the Option key on a Mac keyboard. For example, on a US Mac keyboard, Option+2 will enter the trademark (™) symbol. You can also enter accented characters in Unicode mode. For example, on a US Mac keyboard, entering Option+E and the ’A’ key at the same time will enter the character ’á’ on your remote session.
Other updates in this release include:
*Cleaned up the workspace refresh experience and UI.
*Addressed a smart card redirection issue that caused the remote session to stop responding at the sign-in screen when the ’Checking Status’ message appeared.
*Reduced time to create temporary files used for clipboard-based file copy and paste.
*Temporary files used for clipboard file copy and paste are now deleted automatically when you exit the app, instead of relying on macOS to delete them.
*PC bookmark actions are now rendered at the top-right corner of thumbnails.
*Made fixes to address issues reported through crash telemetry.Updates for version 10.3.7
Date published: 1/6/20
In our final update of the year, we fine-tuned some code and fixed the following behaviors:
*Copying things from the remote session to a network share or USB drive no longer creates empty files.
*Specifying an empty password in a user account no longer causes a double certificate prompt.Updates for version 10.3.6
Date published: 1/6/20
In this release, we addressed an issue that created zero-length files whenever you copied a folder from the remote session to the local machine using file copy and paste.Updates for version 10.3.5
Date published: 1/6/20
We made this update with the help of everyone who reported issues. In this version, we’ve made the following changes:
*Redirected folders can now be marked as read-only to prevent their contents from being changed in the remote session.
*We addressed a 0x607 error that appeared when connecting using RPC over HTTPS RD Gateway scenarios.
*Fixed cases where users were double-prompted for credentials.
*Fixed cases where users received the certificate warning prompt twice.
*Added heuristics to improve trackpad-based scrolling.
*The client no longer shows the ’Saved Desktops’ group if there are no user-created groups.
*Updated UI for the tiles in PC view.
*Fixes to address crashes sent to us via application telemetry.
Note
In this release, we now accept feedback for the Mac client only through UserVoice.Updates for version 10.3.4
Date published: 11/18/19
We’ve been hard at work listening to your feedback and have put together a collection of bug fixes and feature updates.
*When connecting via an RD Gateway with multifactor authentication, the gateway connection will be held open to avoid multiple MFA prompts.
*All the client UI is now fully keyboard-accessible with Voiceover support.
*Files copied to the clipboard in the remote session are now only transferred when pasting to the local computer.
*URLs copied to the clipboard in the remote session now paste correctly to the local computer.
*Scale factor remoting to support Retina displays is now available for multimonitor scenarios.
*Addressed a compatibility issue with FreeRDP-based RD servers that was causing connectivity issues in redirection scenarios.
*Addressed smart card redirection compatibility with future releases of Windows 10.
*Addressed an issue specific to macOS 10.15 where the incorrect available space was reported for redirected folders.
*Published PC connections are represented with a new icon in the Workspaces tab.
*’Feeds’ are now called ’Workspaces,’ and ’Desktops’ are now called ’PCs.’
*Fixed inconsistencies and bugs in user account handling in the preferences UI.
*Lots of bug fixes to make things run smoother and more reliably.Updates for version 10.3.3
Date published: 11/18/19
We’ve put together a feature update and fixed bugs for the 10.3.3 release.
First, we’ve added user defaults to disable smart card, clipboard, microphone, camera, and folder redirection:
*ClientSettings.DisableSmartcardRedirection
*ClientSettings.DisableClipboardRedirection
*ClientSettings.DisableMicrophoneRedirection
*ClientSettings.DisableCameraRedirection
*ClientSettings.DisableFolderRedirection
Next, the bug fixes:
*Resolved an issue that was causing programmatic session window resizes to not be detected.
*Fixed an issue where the session window contents appeared small when connecting in windowed mode (with dynamic display enabled).
*Addressed initial flicker that occurred when connecting to a session in windowed mode with dynamic display enabled.
*Fixed graphics mispaints that occurred when connected to Windows 7 after toggling fit-to-window with dynamic display enabled.
*Fixed a bug that caused an incorrect device name to be sent to the remote session (breaking licensing in some third-party apps).
*Resolved an issue where remote app windows would occupy an entire monitor when maximized.
*Addressed an issue where the access permissions UI appeared underneath local windows.
*Cleaned up some shutdown code to ensure the client closes more reliably.Updates for version 10.3.2
Mac os boot menu. Date published: 11/18/19
In this release, we fixed a bug that made the display low resolution while connecting to a sessionUpdates for version 10.3.1
Date published: 11/18/19
We’ve put together some fixes to address regressions that managed to sneak into the 10.3.0 release.
*Addressed connectivity issues with RD Gateway servers that were using 4096-bit asymmetric keys.
*Fixed a bug that caused the client to randomly stop responding when downloading feed resources.
*Fixed a bug that caused the client to crash while opening.
*Fixed a bug that caused the client to crash while importing connections from Remote Desktop, version 8.Updates for version 10.3.0
Date published: 8/27/19
It’s been a few weeks since we last updated, but we’ve been hard at work during that time. Version 10.3.0 brings some new features and lots of under-the-hood fixes.
*Camera redirection is now possible when connecting to Windows 10 1809, Windows Server 2019 and later.
*On Mojave and Catalina we’ve added a new dialog that requests your permission to use the microphone and camera for device redirection.
*The feed subscription flow has been rewritten to be simpler and faster.
*Clipboard redirection now includes the Rich Text Format (RTF).
*When entering your password you have the option to reveal it with a ’Show password’ checkbox.
*Addressed scenarios where the session window was jumping between monitors.
*The Connection Center displays high resolution remote app icons (when available).
*Cmd+A maps to Ctrl+A when Mac clipboard shortcuts are being used.
*Cmd+R now refreshes all of your subscribed feeds.
*Added new secondary click options to expand or collapse all groups or feeds in the Connection Center.
*Added a new secondary click option to change the icon size in the Feeds tab of the Connection Center.
*A new, simplified, and clean app icon.Updates for version 10.2.13
Date published: 5/8/2019
*Fixed a hang that occurred when connecting via an RD Gateway.
*Added a privacy notice to the ’Add Feed’ dialog.Updates for version 10.2.12
Date published: 4/16/2019
*Resolved random disconnects (with error code 0x904) that took place when connecting via an RD Gateway.
*Fixed a bug that caused the resolutions list in application preferences to be empty after installation.
*Fixed a bug that caused the client to crash if certain resolutions were added to the resolutions list.
*Addresse
https://diarynote-jp.indered.space
There are many ways to remotely control a Windows computer software such as using third party software or the built-in Remote Desktop feature. However, the choices of remotely controlling another computer that is running a different operating system can be quite limited. Although Windows dominates the computer market, but you can still find a lot of people using Macs that runs on OS X.
*Microsoft Remote Desktop For Mac Os X 10.7.5
*Microsoft Remote Desktop For Mac Os X Yosemite
*Microsoft Remote Desktop For Mac Os X 10.6.8
*Microsoft Remote Desktop Os X
*Microsoft Remote Desktop For Mac
*Os X Remote Desktop
Apple has their own remote access software called Apple Remote Desktop (ARD) which is a shareware that cost $79.99. It comes with some powerful features such as software distribution and automation to perform repetitive tasks on remote computers, but unfortunately it is meant for Mac to Mac and not cross platform.
Use Microsoft Remote Desktop for Mac to connect to a remote PC or virtual apps and desktops made available by your admin. With Microsoft Remote Desktop, you can be productive no matter where you are. GET STARTED Configure your PC for remote access using the information at https://aka.ms/rdsetup. Remote Desktop → Mac OS X Instructions The following page(s) contain instructions on using Remote Desktop to connect to Faculty & Staff Windows computers on the UMKC campus (from off-campus). Your campus computer must be powered on to receive connections.
In this article, we will be sharing a few methods on how you can remotely access Apple Mac computers from another computer running Windows for free.1. TeamViewer
TeamViewer is one of the most popular remote access software that is commonly used to provide remote support because it is easy to use and comes with really powerful features such as file transfer, switch sides, conference call, VoIP, screen recording and etc. Other than that, TeamViewer also works on multiple operating systems where it allows you to control a Mac OS X system from a Windows computer.
You will need to download and install the “HOST” version of TeamViewer on the Mac computer that you want to remotely control. As for the Windows computer that will be controlling the Mac computer, simply download the TeamViewer full version, install and run it. Enter the ID followed by the password and you’re able to connect to the OS X machine. The ID will not change and always stay the same on the machine.
The TeamViewer Host options can be accessed by clicking on the TeamViewer icon at the menu bar and select Preferences. You can change your password, configure the voice, microphone and phone conferencing, access control and etc.
Download TeamViewer Host for Mac
2. LogMeIn Free
LogMeIn Free allows you to conveniently remotely control a Mac computer running OS X from Windows through its web interface or the Firefox plugin. First you will need to create a free account, then login from the Mac computer and click the Add Computer button to download the LogMeIn Installer. After installation, you are able to access that computer from any other computer by logging in to LogMeIn. Do take note that the file transfer feature is disabled in the free version.
Download LogMeIn Free
3. RealVNC
Although there are many versions of VNC which are mostly free, RealVNC targets the enterprise users by offering shareware version and cross platform support to Windows, Mac OS X, Linux, Solaris, HP-UX and AIX. Similarly to LogMeIn, the free version of RealVNC provides a very basic remote access feature without file transfer, chat, session encryption, optimized performance, printing and deployment tool. You can use other VNC viewer such as TightVNC and UltraVNC to access the RealVNC server.
Download RealVNC12Next › View AllMicrosoft Remote Desktop For Mac Os X 10.7.5 You might also like:Unable to Remotely Control or Configure Kaspersky using Remote Access SoftwareSilently Push Install VNC Server to Remote ComputersRemotely Enable or Disable Windows Remote DesktopTop 8 Remote Access Software for Providing Online SupportCrack or Decrypt VNC Server Encrypted Password 6 Comments - Write a CommentSwikriti2 years ago
Can I use softwares like Photoshop, Illustrator, Dreamweaver etc (which are in MAC) from Windows system if the windows system doesn’t have the same softwares?Reply
If the OSX commuter has remote management enabled, what client does the Windows computer need to run to connect to it?Replymenlo6 years ago
Logmein Free isn’t completely free anymore. You can buy an account, and for IT people, you can buy Logmein Central, and then tie a couple of Logmein Pro pay-for machines to the account (easy). Then you are given logmein free subscriptions you can then tie into the account. If the remote access is going to give you an hourly rate or save you time (and time is money) then it is WORTH buying the annual subscription.
The thing that has always been an issue for me is Logmein wants to boast about their ability to stream the remote desktop as HD, and frankly that is just bells and whistles to me. That requires WAY more bandwidth, and is pointless in most cases. The GREAT thing about logmein, even over their join.me product, is you can cut back the color quality or even make it black and white. This SIGNIFICANTLY speeds up the remote session to make sure things work right. Join.me is a $100/yr subscription, to compete with their enterprise version rescue, but again the quality of the remote session is simply limiting and time wasting for the average IT guy who needs to help the user.
More to the point of Logmein Pro, you can actually perform secure file transfers, and monitor the system in a dashboard. The Dashboard for pro subscriptions ALSO gives you things like the top fifteen running processes, all scheduled tasks, the most current 15 lines of the event viewer log, etc. You can perform various levels of remote boot, and even utilize a scripting type offering called one to many.
It is incredibly powerful, and COMPLETELY worth the cost of the annual subscriptions.
(I do NOT work for Logmein, just an IT consultant.)Reply
Thank you very much. Used realvnc viewer on win 7 64bit, to connect to a mac laptop on OS X Mavericks.ReplyJC7 years ago
I was using the built in vnc server for osx, but with the last 10.8.5 update my connection got a lot of lag. I updated my vnc viewers to the latest but that didn’t help. I finally downloaded the vine vnc server ( turned off the osx vnc server ) and bingo problem solved. Thanks for the article, it was a great help.Reply
thanks a lotReplyLeave a Reply-->
We regularly update the Remote Desktop client for macOS, adding new features and fixing issues. Here’s where you’ll find the latest updates.
If you encounter any issues, you can always contact us by navigating to Help > Report an Issue.Updates for version 10.4.0
Date published: 8/20/20
In this release, we’ve made substantial updates to the underlying code that powers the Remote Desktop experience across all our clients. We’ve also added some new features and addressed bugs and crashes that were showing up in error reporting. Here are some changes you may notice:
*
PC Quick Connect (Cmd+K) allows you to connect to a PC without creating a bookmark.
*
Auto-reconnect now recovers from transient network glitches for PC connections.
*
When resuming a suspended MacBook, you can use auto-reconnect to reconnect to any disconnected PC connections.
*
Added support for HTTP proxies when subscribing and connecting to Windows Virtual Desktop resources.
*
Implemented support for HTTP proxy automatic configuration with PAC files.
*
Integrated support for NETBIOS name resolution so you can connect to PCs on your local network more easily.
*
Fixed an issue where the system menu bar wouldn’t respond while the app was in focus.
*
Fixed a client-side race condition that could cause decryption errors on the server.
*
Made improvements to monitor layout and geometry heuristics for multimon scenarios involving Retina-class monitors.
*
Multimon layout configurations are now maintained across session redirection scenarios.
*
Addressed an issue that prevented the menu bar from dropping in multimon scenarios.
*
User account UI that interacts with the macOS keychain will now surface keychain access errors.
*
Hitting cancel during workspace subscription will now result in nothing being added to the Connection Center.
*
Added key mappings for Cmd+Z and Cmd+F to map to Ctrl+Z and Ctrl+F respectively.
*
Fixed a bug that caused remote apps to open behind the Connection Center when launched.
*
Worked around an issue where AAC audio playback on macOS 10.15 would cause the client to stall.
*
Shift+left-click now works in Unicode mode.
*
Fixed a bug where using the Shift key triggered the Sticky Keys alert in Unicode mode.
*
Added a check for network availability before connection initiation.
*
Addressed pulsing of PC thumbnails that sometimes happened during the connection sequence.
*
Fixed a bug where the password field in the Add/Edit User Account sheet become multiline.
*
The ’Collapse All’ option is now greyed out if all workspaces are collapsed.
*
The ’Expand All’ option is now greyed out if all workspaces are expanded.
*
The first-run permissions UI is no longer shown on High Sierra.
*
Fixed an issue where users were unable to connect to Windows Virtual Desktop endpoints using saved credentials in the DOMAINUSERNAME format.
*
The username field in the credential prompt is now always prepopulated for Windows Virtual Desktop connections.
*
Fixed a bug that clipped the Edit, Delete, and Refresh buttons for workspaces if the Connection Center wasn’t wide enough.
*
The ’email or workspace URL’ field in the Add Workspace sheet is no longer case-sensitive.
*
Fixed a number of accessibility issues that impacted VoiceOver and keyboard navigation scenarios.
*
Lots of updates to improve interoperability with current and upcoming features in the Windows Virtual Desktop service. Paragon ntfs for mac cracked download.
*
You can now configure the AVC support level advertised by the client from a terminal prompt. Here are the support levels you can configure:
*Don’t advertise AVC support to the server: defaults write com.microsoft.rdc.macos AvcSupportLevel disabled
*Advertise AVC420 support to the server: defaults write com.microsoft.rdc.macos AvcSupportLevel avc420
*Advertise support for AVC444 support to the server: defaults write com.microsoft.rdc.macos AvcSupportLevel avc444
Thanks again to everyone who reported bugs and took the time to help us diagnose problems!Updates for version 10.3.9
Date published: 4/6/20
In this release we’ve made some changes to improve interoperability with the Windows Virtual Desktop service. In addition, we’ve included the following updates:
*Control+Option+Delete now triggers the Ctrl+Alt+Del sequence (previously required pressing the Fn key).
*Fixed the keyboard mode notification color scheme for Light mode.
*Addressed scenarios where connections initiated using the GatewayAccessToken RDP file property didn’t work.
Note
This is the last release that will be compatible with macOS 10.12.Updates for version 10.3.8
Date published: 2/12/20
It’s time for our first release of 2020!
With this update, you can switch between Scancode (Ctrl+Command+K) and Unicode (Ctrl+Command+U) modes when entering keyboard input. Unicode mode allows extended characters to be typed using the Option key on a Mac keyboard. For example, on a US Mac keyboard, Option+2 will enter the trademark (™) symbol. You can also enter accented characters in Unicode mode. For example, on a US Mac keyboard, entering Option+E and the ’A’ key at the same time will enter the character ’á’ on your remote session.
Other updates in this release include:
*Cleaned up the workspace refresh experience and UI.
*Addressed a smart card redirection issue that caused the remote session to stop responding at the sign-in screen when the ’Checking Status’ message appeared.
*Reduced time to create temporary files used for clipboard-based file copy and paste.
*Temporary files used for clipboard file copy and paste are now deleted automatically when you exit the app, instead of relying on macOS to delete them.
*PC bookmark actions are now rendered at the top-right corner of thumbnails.
*Made fixes to address issues reported through crash telemetry.Updates for version 10.3.7
Date published: 1/6/20
In our final update of the year, we fine-tuned some code and fixed the following behaviors:
*Copying things from the remote session to a network share or USB drive no longer creates empty files.
*Specifying an empty password in a user account no longer causes a double certificate prompt.Updates for version 10.3.6
Date published: 1/6/20
In this release, we addressed an issue that created zero-length files whenever you copied a folder from the remote session to the local machine using file copy and paste.Updates for version 10.3.5
Date published: 1/6/20
We made this update with the help of everyone who reported issues. In this version, we’ve made the following changes:
*Redirected folders can now be marked as read-only to prevent their contents from being changed in the remote session.
*We addressed a 0x607 error that appeared when connecting using RPC over HTTPS RD Gateway scenarios.
*Fixed cases where users were double-prompted for credentials.
*Fixed cases where users received the certificate warning prompt twice.
*Added heuristics to improve trackpad-based scrolling.
*The client no longer shows the ’Saved Desktops’ group if there are no user-created groups.
*Updated UI for the tiles in PC view.
*Fixes to address crashes sent to us via application telemetry.
Note
In this release, we now accept feedback for the Mac client only through UserVoice.Updates for version 10.3.4
Date published: 11/18/19
We’ve been hard at work listening to your feedback and have put together a collection of bug fixes and feature updates.
*When connecting via an RD Gateway with multifactor authentication, the gateway connection will be held open to avoid multiple MFA prompts.
*All the client UI is now fully keyboard-accessible with Voiceover support.
*Files copied to the clipboard in the remote session are now only transferred when pasting to the local computer.
*URLs copied to the clipboard in the remote session now paste correctly to the local computer.
*Scale factor remoting to support Retina displays is now available for multimonitor scenarios.
*Addressed a compatibility issue with FreeRDP-based RD servers that was causing connectivity issues in redirection scenarios.
*Addressed smart card redirection compatibility with future releases of Windows 10.
*Addressed an issue specific to macOS 10.15 where the incorrect available space was reported for redirected folders.
*Published PC connections are represented with a new icon in the Workspaces tab.
*’Feeds’ are now called ’Workspaces,’ and ’Desktops’ are now called ’PCs.’
*Fixed inconsistencies and bugs in user account handling in the preferences UI.
*Lots of bug fixes to make things run smoother and more reliably.Updates for version 10.3.3
Date published: 11/18/19
We’ve put together a feature update and fixed bugs for the 10.3.3 release.
First, we’ve added user defaults to disable smart card, clipboard, microphone, camera, and folder redirection:
*ClientSettings.DisableSmartcardRedirection
*ClientSettings.DisableClipboardRedirection
*ClientSettings.DisableMicrophoneRedirection
*ClientSettings.DisableCameraRedirection
*ClientSettings.DisableFolderRedirection
Next, the bug fixes:
*Resolved an issue that was causing programmatic session window resizes to not be detected.
*Fixed an issue where the session window contents appeared small when connecting in windowed mode (with dynamic display enabled).
*Addressed initial flicker that occurred when connecting to a session in windowed mode with dynamic display enabled.
*Fixed graphics mispaints that occurred when connected to Windows 7 after toggling fit-to-window with dynamic display enabled.
*Fixed a bug that caused an incorrect device name to be sent to the remote session (breaking licensing in some third-party apps).
*Resolved an issue where remote app windows would occupy an entire monitor when maximized.
*Addressed an issue where the access permissions UI appeared underneath local windows.
*Cleaned up some shutdown code to ensure the client closes more reliably.Updates for version 10.3.2
Mac os boot menu. Date published: 11/18/19
In this release, we fixed a bug that made the display low resolution while connecting to a sessionUpdates for version 10.3.1
Date published: 11/18/19
We’ve put together some fixes to address regressions that managed to sneak into the 10.3.0 release.
*Addressed connectivity issues with RD Gateway servers that were using 4096-bit asymmetric keys.
*Fixed a bug that caused the client to randomly stop responding when downloading feed resources.
*Fixed a bug that caused the client to crash while opening.
*Fixed a bug that caused the client to crash while importing connections from Remote Desktop, version 8.Updates for version 10.3.0
Date published: 8/27/19
It’s been a few weeks since we last updated, but we’ve been hard at work during that time. Version 10.3.0 brings some new features and lots of under-the-hood fixes.
*Camera redirection is now possible when connecting to Windows 10 1809, Windows Server 2019 and later.
*On Mojave and Catalina we’ve added a new dialog that requests your permission to use the microphone and camera for device redirection.
*The feed subscription flow has been rewritten to be simpler and faster.
*Clipboard redirection now includes the Rich Text Format (RTF).
*When entering your password you have the option to reveal it with a ’Show password’ checkbox.
*Addressed scenarios where the session window was jumping between monitors.
*The Connection Center displays high resolution remote app icons (when available).
*Cmd+A maps to Ctrl+A when Mac clipboard shortcuts are being used.
*Cmd+R now refreshes all of your subscribed feeds.
*Added new secondary click options to expand or collapse all groups or feeds in the Connection Center.
*Added a new secondary click option to change the icon size in the Feeds tab of the Connection Center.
*A new, simplified, and clean app icon.Updates for version 10.2.13
Date published: 5/8/2019
*Fixed a hang that occurred when connecting via an RD Gateway.
*Added a privacy notice to the ’Add Feed’ dialog.Updates for version 10.2.12
Date published: 4/16/2019
*Resolved random disconnects (with error code 0x904) that took place when connecting via an RD Gateway.
*Fixed a bug that caused the resolutions list in application preferences to be empty after installation.
*Fixed a bug that caused the client to crash if certain resolutions were added to the resolutions list.
*Addresse
https://diarynote-jp.indered.space
コメント